| Dockable
Camera Back |
Interface Capability |
Notes |
|
|
|
| Digital Camera output adaptors: |
|
Sony
CATX50
Dockable Output Adaptor
with teleprompter power
For DXCD30/35/50 Series
Camera Heads (interchangeable with CA-TX7*)
|
76-pin
digital or Pro-50-pin analog selectable dock to camera, Digital or Analog Triax, Return
out (BNC), 2 mic inputs, 2 Ch intercom with level control, prompter out, DC prompter
power or large lens power out (35W), Data out (10-pin), Gen Lock in |
Purchase
from VTP
|
| *Note: various limitations may apply to functionality based on camera head (DXC
30/35/50). The CATX7 was discontinued in October of 2004. The CATX50 camera
head dockable output adaptor works with the CCU-TX50 4RU CCU (priced and sold separately).
The CCU-TX50 now includes the DXBK-701 SDI output board as standard as well as the
COU-TX7 standard operational panel. Two CCU-TX50s can be installed side by side in
the optional RMM-301 rack mount bracket. For remote panel operations on the
CCU-TX50, the optional RCPD50 Camera Remote Control Panel can be used. |
|
|
|
|
| Analog Camera output adaptors: |
|
Sony
CA755
Camcorder Output Adaptor for
Triax and selective CCU control
For DVW/DNW Series Camcorders
|
40-pin
digital dock to DVW/DNW camcorder, wideband Analog Triax out, 1 Ch intercom, DC in (4-pin
XLR) |
Purchase
from VTP
. |
Note: This adaptor mounts on the V-lock battery mounting on the back of the
camcorder and provides the necessary 40-pin interface to the camcorder to operate the
DVW/DNW with the CCU550A wide-band analog or CCU700A camera control unit (coax BNC
conversion to Triax required, local power at camera head, or Triax Kings type Triax for
525/59.94 NTSC with DC power through the Triax). The DVW sends this adaptor digital video
which is converted internally within the adaptor to wideband analog for output through the
Triax connection (22.5 MHz Y, 45 MHz for Chroma) to the supporting CCU. The
supporting CCU then converts this to 4:2:2 SDI component digital output (at the CCU/CCU
SDI optional output). The DVW needs to be running vers. 2.10 or greater software,
and the camera set-up card is inoperative when the output adaptor/CCU control path is
connected.
DC in: XLR 4-pin,11.5V to 17V
Ret Out: BNC
Ret Control: 6-pin
Earphone: Mini-Jack 8 ohm
CCU: Kings type Triax connectors
Intercom/PGM: headset XLR 5-pin
40-Pin connector (to camcorder)
|
|
|
Back to Top of
this page |
|
|
| Docking adaptor chart: |
| Sony
BVP-Series to Sony CA570/CA550/CA530, no docking adaptor necessary |
| Sony
BVP-950 to 50-pin DNV-5 requires Sony CA753 Docking Adaptor |
| Sony
BVP-750/1 to 50-pin BVV-5/DNV-5 requires Sony CA753 Docking Adaptor |
| Sony
BVP-570/BVP 550/1 to 50-pin BVV-5/DNV-5 requires Sony CA553 Docking Adaptor |
| Sony
BVP-Series to 50-pin DSR-1 or PVV-1/PVV-1A/PVV-3 requires Sony CA514 Docking Adaptor |
| Sony
BVP-Series to Panasonic AJ-D90 requires Panasonic AJ-YAD90SB Docking Adaptor |
| Sony
DXC-D50/D30/D35 to Sony CATX7/DSR1-1/PVV-3/PVV-1/EVV-9000, no dock adaptor necessary |
| Sony
DXC-Series to Panasonic AJ-D90 requires Panasonic AJ-YAD90SD Docking Adaptor |
| Sony
DXC-D50/D30/D35/637/537/327A to Sony DNV-5/BVV-5 requires Sony CA511 Docking Adaptor |
| Sony
DXC-D50/D30/D35/637/537/327/325 to JVC BRD-40U requires JVC SAK45U Docking Adaptor |
| Sony
DXC-D30/D35/637/537/327/325 to Panasonic AG-7450 requires Sony CA512 Docking Adaptor |
| Panasonic
AWF575H/WVF565H to Panasonic AJ-D90, no docking adaptor necessary |
| Panasonic
AWF700A/WV-F250B to Panasonic AJ-D90, no docking adaptor necessary |
| Panasonic
AWF575H to Sony BVV-5 requires Panasonic WV-VT16A |
| Panasonic
AWF575H to Sony PVV-3/PVV-1A requires Panasonic AD-VT17 |
|
| Camera Multi-Pin adaptor chart: |
| Sony CA605
BVWD600 Camcorder analog Triax/26-pin interface (Discontinued Nov. 2001) |
| Sony
BKW402A BVWD600/400A Camcorder to 26 pin interface (Discontinued) |
|
|
|
Back to Top of
this page |
|
|
Updated 10/05/07 |
|
All
Sony Cameras