|
|
 |
Projector Index |
Sony Plasma Displays |
||
| Click here for | ||
|
||
Home Page |
||
 |
|
Click here for  Sony
Monitors |
Sony Plasma Displays Note: VGA400 is considered 640x400; VGA480 is considered 640x480, SVGA is considered 800x600, XGA is considered 1024x768, SXGA is considered 1280x1024, WXGA is considered 1366x768, UXGA is considered 1600x1200, and WUXGA is considered 1920x1200. Within these native pixel count resolutions, there are a number of supported (and not-supported) Horizontal (expressed in kHz) and Vertical Frequencies (expressed in Hz) which are not shown here which should be considered for compatibility with your graphic input modes. Regarding plasma in general, the maximum input resolution and input type rated for internal conversion for mapping to a plasma panel differs from the actual displayed resolution. To actually display native 800x600 in 4:3 (or from a graphics display card set in 4:3 mode), on a 16:9 panel, the panel must have native mapping resolution of 1024x768 (so the 4:3 square cutout will be in this case 800x600). Consequently, a native 800x600 16:9 panel will display the same 4:3 square cutout in 600x400. |
| Plasma/Brightness | Resolution |
Notes |
| Sony Gas Plasma Displays | ||
| Note: additional models may be available which are not listed on this web site | ||
| Sony FWD-50PX3 16:9 50" Plasma |
1365x768 Native; |
Purchase
from VTP |
| Notes: Improved
contrast ratio to 15000:1 (dark room), up to 60,000 hours (to half-brightness).
Improved screen saver for Auto Image Retention. New capability for Picture
AND Picture Mode: DVI-D and RGB. Conference Mode for improved color rendition in
teleconferencing applications. Able to display 1.07 billion colors. DVI-D (HDCP), PC
Input (HD15 pin RGB/YUV Component), Composite, Y/C (S-Video). LAN connection with web GUI
for centralized control of multiple screens (functionality of BKM-FW32 Internal Network
Management Device) is now included in the base unit. New selectable Multi-Display
tile/window sizes are now supported. Auto signal detection of RGB/Component can be
deactivated. RS232C and Multi-Function remote. Included Accessories: 3 Meter Component (Y/Pb/Pr) to HD15 Cable Multi-function Remote Ordering: FWD-50PX3/B with Black Bezel FWD-50PX3/S with Silver Bezel Optional Accessories: BKM-FW11 Component/RGB Input Board using 5-BNC connectors BKM-FW12 RGB/Component Active Loop throughput SS-SP50FW/S Silver Speakers for FWD-50PX3/S and FWD-50PX3/B PLP-91/D: Wall mount with tilt up to 15 degrees. Usable for portrait or landscape mounting. SFM1 Flat wall mount SFM1 Flat wall mount SPM-TRI/C: Clear color(Acrylic) tabletop stand SPM-TRI/E: Silver color(Acrylic) tabletop stand BKM-FW50: Internal Network Media Card with SD CF Slot which allows for IP/CF Signage ICS-SP30: Internal ATSC/NTSC/QAM/Hotel Networking Tuner (digital/analog/QAM cable) EBS-SP35: External ATSC/NTSC/QAM/Hotel Networking Tuner (digital/analog/QAM cable) |
||
Updated 11/19/07 |
||
