This unit is specifically designed to perform frame accurate I frame edit recording in the Sony IMX format, edit sourcing of MPEG II-based IMX recordings, and Digital Betacam, Betacam/SP/SX playback under standard RS-422A machine control.  MPEG IMX Studio Editing Recorder -for 525/625 standard definition live television reality programs (trucks and stage recording), full aperture video post production and editing (512 active lines in 525 format, 608 active lines in 625 format), compressed digital content archiving, and contribution level MPEG-2 studio profile digital television mastering.

This VTR supports the recommended 50Mb/s studio profile MPEG-2 recording for contribution level ATSC digital television storage, allows for vertical interval support with production aperture, and is dual standard 525/59.94 and 625/50 (pull down is not supported).  This VTR offers the studio profile MPEG-2 4:2:2 Profile @ ML recording in a Sony IMX production format, which is I frame (only), 8-bit intra-frame compressed component digital recording at 50Mbps (designated the SMPTE D-10 format). The VTR is a compact 4 RU in height.  It comes equipped with a an SDI I/O, SDTI-CO I/O, Analog Component I/O, Analog Composite I/O, 4-ch Analog Audio balanced (XLR) I/O, 2-ch Analog Audio Monitor out, and AES/EBU 8-ch (75 Ohm BNC x 4) audio input and output.

This unit can play back Betacam/SP 525/625, Betacam SX 525/625, MPEG IMX 525/625, and Digital Betacam 525/625 tapes. It can convert playback accordingly to 30, 40, or 50 Mbps MPEG-2 4:2:2 Profile @ ML with built-in SDTI-CP interface (standard feature). The SDTI-CP interface also provides for 30, 40, or 50 Mbps MPEG-2 4:2:2 Profile @ ML input. 

The unit features pre-read IMX recording, dynamic motion control, and records 8 Audio channels at 16-bits per channel (48KHz sample rate) or 4 Audio channels at 24-bits per channel (48 KHz sample rate, with bit length set with M371: DATA LENGTH in Maintenance Mode). All IMX audio channels can be independently edited (in either mode, however the data length mode setting must be matched and consistent in the recorder).  This unit can also transfer IMX D-10 stream in or out at 2x real time via SDTI-CP (standard feature), and has Metadata IMX (and UMID) handling with a capacity of 255 bytes/frame.

This unit is specifically designed to perform frame accurate edit recording in the IMX format, and edit sourcing of MPEG II-based IMX recordings, and Betacam/SP/SX under standard RS-422A machine control (Digital Betacam playback in this particular model is not supported).  MPEG IMX Studio Editing Recorder -for 525/625 standard definition live television reality programs (trucks and stage recording), full aperture video post production and editing (512 active lines in 525 format, 608 active lines in 625 format), compressed digital content archiving, and contribution level MPEG-2 studio profile digital television mastering.

This VTR supports the recommended 50Mb/s studio profile MPEG-2 recording for contribution level ATSC digital television storage, allows for vertical interval support with production aperture, and is dual standard 525/59.94 and 625/50 (2:3 pull down is not supported).  This VTR offers the studio profile MPEG-2 4:2:2 Profile @ ML recording in a Sony IMX production format, which is I frame (only), 8-bit intra-frame compressed component digital recording at 50Mbps (designated the SMPTE D-10 format). The VTR is a compact 4 RU in height.  It comes equipped with a an SDI I/O, SDTI-CO I/O, Analog Component I/O, Analog Composite I/O, 4-ch Analog Audio balanced (XLR) I/O, 2-ch Analog Audio Monitor out, and AES/EBU 8-ch (75 Ohm BNC x 4) audio input and output. 

This unit can play back Betacam/SP 525/625, Betacam SX 525/625 and MPEG IMX 525/625 tapes. It can convert playback accordingly to 30, 40, or 50 Mbps MPEG-2 4:2:2 Profile @ ML with built-in SDTI-CP interface (standard feature). The SDTI-CP interface also provides for 30, 40, or 50 Mbps MPEG-2 4:2:2 Profile @ ML input. 

The unit features pre-read IMX recording, dynamic motion control, and records 8 Audio channels at 16-bits per channel (48KHz sample rate) or 4 Audio channels at 24-bits per channel (48 KHz sample rate, see MSWM2000/1 above for more information abour audio data length and modes). This unit can also transfer IMX D-10 stream in or out at 2x real time via SDTI-CP (standard feature), and has Metadata (and UMID) IMX capacity of 255 bytes/frame.

This unit is specifically designed to perform frame accurate dynamic tracking edit sourcing of MPEG II-based IMX recordings, Betacam/SP/SX and Digital Betacam under standard RS-422A machine control.  MPEG IMX Studio Editing Player -for 525/625 standard definition live television reality programs (trucks and stage recording), full aperture video post production and edit sourcing (512 active lines in 525 format, 608 active lines in 625 format), compressed digital content archive playback, and contribution level MPEG-2 studio profile digital television master playback.

This player supports the recommended 50Mb/s studio profile MPEG-2 playback for editing contribution level ATSC digital television storage, allows for vertical interval support with production aperture, and is dual standard 525/59.94 and 625/50 (2:3 pull down is not supported).  The IMX format is at studio profile MPEG-2 4:2:2 Profile @ ML, which is I frame (only), 8-bit intra-frame compressed component digital at 50Mbps (designated the SMPTE D-10 format). The player is a compact 4 RU in height.  It comes equipped with a an SDI output, SDTI-CO output, Analog Component and Analog Composite output, 4-ch Analog Audio balanced (XLR) out, 2-ch Analog Audio Monitor out, and AES/EBU 8-ch (75 Ohm BNC x 4) output.

This unit can play back Betacam/SP 525/625, Betacam SX 525/625 and MPEG IMX 525/625 tapes. It can convert playback accordingly to 30, 40, or 50 Mbps MPEG-2 4:2:2 Profile @ ML with built-in SDTI-CP output interface (standard feature).

Audio in IMX is 8 channels, 16-bits per channel (48KHz sample rate) or 4 channels at 24-bits per channel (48 KHz sample rate).  This unit can also transfer IMX D-10 stream out at 2x real time via SDTI-CP (standard feature), and supports the Metadata (and UMID) IMX capacity of 255 bytes/frame output.