This J30SDI model has no analog component video output. This unit is specifically designed to perform in a limited non-synchronous non-editing playback environment, although Remote RS422A (limited) and
RS232C (limited) is standard. The I-Link Interface is 25Mb/s DV signal (DV codec compressed video, audio at 2 Ch 48kHz 16-bit or 4 Ch 32kHz 12-bit, and time code capable), at 720x480 525/59.94 or 720x576 625/50 (play speed depending, and no format cross conversion).  Supports reading of UMID and Essence Marks on MPEG IMX and Digital Betacam Tapes (if correctly stamped) and outputs them through the SDI interface (no Auto Event detection).   AFM Audio is not supported.  Audio is otherwise mappable selected from Ch 1/2, Ch 3/4, and Cue Track.  Audio is automatically muted for off-speed playback such as in a shuttling mode.  External Sync input is for frame lock only.  Other limitations may apply.

Tape Playback Speeds
Digital Betacam: 96.7mm/s 525, 96.7mm/s 625 (constant)
MPEG IMX: 64.467mm/s 525, 53.776mm/s 625
BetacamSX: 59.515mm/s 525, 59.575mm/s 625
Analog Betacam Oxide and Betacam SP: 118.6mm/s 525, 101.5mm/s 625

Other Features 
Analog Composite Output: BNC (x1), Pin Jack (x1)
S-video Output: Mini-DIN 4-pin (x1)
SDI Output: BNC (x2)
I-Link Output: DV format, 6-pin (x1) IEEE 1394
Time Code Output: BNC (x1)
Monitor Output L/R: Pin Jack (x2) -10dBu 47 kOhms; XLR (male x2) +4 dBm, 600 kOhms
Headphone Output: JM-60 Stereo Phone Jack
RS-422A: D-sub 9-pin (female x 1) Sony 9-pin remote interface
RS-232C: D-sub 9-pin (male x1)
Wireless: SIRCS

Ordering Information 
J30SDI model: SDI, TC , I-Link, Composite analog, Y/C output, No analog component video output, replaces the discontinued J3/902.

J30 model: Component analog, Composite analog, Y/C output, No SDI output, No TC output, replaces the discontinued J3/901