

|

|
Broadcast & Professional
-Authorized Dealer-
< Sony Home >
|
Jump to: DVW-970WS |
DSR-450WSL | DSR-400K
Traditional Tape-Based Camcorders |
Product |
Features |
DVW-970WS
Sony Digital Betacam

Image shows optional battery, lens, etc. available at additional cost
 |
-
Digital Betacam standard definition
-
1MegaPixel 2/3" 3CCD 980hx988v
-
4:3/16:9 Selectable Widescreen, 29.97 interlaced frames/sec
-
10-bit recorded depth
-
NTSC (4:2:2 recorded subsample) based format
-
96 Mb/sec active picture data rate 10-bit 2:1 DCT based compression
-
DI SMPTE 259M compliant format
-
14-bit A/D converters
-
24PsF, 25PsF and 30PsF image capture
-
Uses S-Small Digital Betacam Tapes
|
Widescreen (squeeze) recording or 4:3. Sony has brought a "24" Frame Progressive Imaging* option to Standard Definition Digital Betacam with the DVW970WS 3-CCD 2/3" 16:9/4:3 Progressive (PsF) or Interlaced Digital Betacam Camcorder. The DVW970WS uses a 2" B&W BVF-V20W Viewfinder and VCT14 Tripod Plate (the lens is sold separately). It has a Slow Shutter Feature, Progressive Mode (recorded as PsF), and, like the XDCAM Camcorders, uses an optional CBK-FC01/1 pull down board (*24 Frame Progressive Imaging is actually 23.98PsF frame rate imaging with pulldown). The DVW970WS model replaces the DVW-790WS model, which has been discontinued. The PAL version of this unit is the DVW-970P.
ACCESSORIES & OPTIONAL EQUIPMENT |
Supplied Accessories for DVW-970WS:
- DVW970WS Camcorder Body
- Shoulder Strap
- Camera Micophone
- 2" B&W BVF-V20W Viewfinder
- (no lens, no tripod plate, no battery)
|
Optional Equipment for DVW-970WS:
- CBK-SD01 SDI Output Board
- CBK-MB01 Picture Cache Board
- CBK-FC01/1 pull down board
|
|
|
DSR-450WSL
Sony DV Camcorder

Image shows optional battery, wireless, light, lens, etc. available at additional cost
 |
-
1MegaPixel 2/3" 3CCD 980hx988v
-
4:3/16:9 Selectable Widescreen
-
14-bit A/D
-
Digital DVCAM 25 Mb/sec 8-bit 5:1 DV type DCT based compression, interlaced 525/30frame format
-
NTSC (480 active line 4:1:1 recorded subsample)
-
24P (with 2-3 pull down) or 30PsF progressive shooting
-
2.5" flip out cover LCD panel
-
i.LINK® (DV/DVCAM) In/Out connector for back up recording
-
High power video light connector
-
InfoLithium® battery compatible -- displays the battery remaining time in minutes on viewfinder or the LCD
-
Long record time DVCAM: 184 min or DV SP: 270 min
|
Widescreen (squeeze) recording or 4:3. Sony has brought a "24" Frame Progressive (PsF) Imaging* option to DVCAM with this DSR450WSL 3-CCD 2/3" 16:9/4:3 Camcorder. Progressive (PsF) or Interlaced DVCAM/DV (Mini or Standard Cassette) 525/625 Dual Standard Camcorder with 23.98PsF (with 3:2 pulldown) as standard*, with with DXF801 Viewfinder and VCTU14 Tripod Plate (lens is sold separately). 525 or 625 operation. 23.98PsF/i (with mandatory 3:2 pull down), 25PsF/i, 29.97PsF/i. 980h x 988v effective picture elements (NTSC 525 operation), and 980h x 1164v (PAL 625 operation). Optical ND Filter. Film-Like Gamma function. Compatible with 8-pin Sony RM-B150 and RM-B750 Remote Controls. 2.5” 200k Pixel Color CCD Viewfinder in addition to the traditional DXF801 Viewfinder. 6-Pin I-Link output (note: in certain settings and conditions, an input of a recognized I-Link device video can be displayed on the viewfinder and the LCD monitor, and through the monitor output connector, but cannot be recorded in the VTR portion of this camcorder. This is designed to provide only some simple assistance to the operator in the use of an external I-Link capture hard drive). Memory Stick Slot. (DSR450WS Only features include: Slow Shutter Feature, Min. Illumination .05 at 2000 lux. Progressive Mode, optional CBK-SD01 SDI Output Board, optional CBK-SC01 Analog Composite Input Board. No CCU operation, No Clip Link. NTSC 525 line operation only. *The 23.98 Processing is built-in for the DSR-450WSL camcorder (using a factory pre-installed PP-58A board), and does not need to be purchased separately.
ACCESSORIES & OPTIONAL EQUIPMENT |
Supplied Accessories for DSR-450WSL:
- DSR450WS Camcorder Body
- Shoulder Strap
- Camera Micophone
- DXF-801 1.5" B&W Viewfinder,
- VCTU14 Tripod Plate
- (no lens, no battery)
|
Optional Accessories for DSR-450WSL:
-
CBK-SC01 Analog Composite Input Board
- CBK-SD01 SDI Output Board
- RM-B150//A or RM-B750 remote controller
- Selective MSH-32, MSH-64, MSH-128MB Memory Stick media
- Batteries and Power System
|
|
|
DSR-400K
Sony DV Camcorder

Image shows optional battery, wireless. light, etc. available at additional cost
 |
-
1MegaPixel 2/3" 3CCD 980hx988v
-
4:3 Recording only
-
14-bit A/D
-
Digital DVCAM 25 Mb/sec 8-bit 5:1 DV type DCT based compression, interlaced 525/30frame format
-
NTSC (480 active line 4:1:1 recorded subsample)
-
I-Link Output (output only)
-
Interchangeable 2/3" zoom lenses
-
Full DSP (Digital Signal Processing)
-
High Resolution 1.5" B&W viewfinder (DXF-801) and LCD panel
-
Memory Stick Scene file storage and software upgrade
-
Video Light Connector
-
Long record time DVCAM: 184 min or DV SP: 270 min
|
No widescreen (squeeze) recording, just 4:3. DSR-400K 3-CCD 2/3" 4:3 (only) Interlaced DVCAM/DV (Mini or Standard Cassette) Camcorder. Uses DXF801 Viewfinder and VCTU14 Tripod Plate, 2/3" lenses. NTSC 525 line operation only. No 23.98PsF, No 25PsF, just 29.97PsF or interlace only. 980h x 988v effective picture elements (slightly higher limited horizontal resolution for 4:3 imaging rated at 920 TV Lines versus 850 TV Lines for the DSR450WS when it is in the 4:3 mode). No Film-Like Gamma function. No 8-pin Sony RM-B150 or RM-B750 Remote Control. 2.5” 200k Pixel Color CCD Viewfinder in addition to the traditional DXF801 Viewfinder. 6-Pin I-Link output (note: in certain settings and conditions, an input of a recognized I-Link device video can be displayed on the viewfinder and the LCD monitor, and through the monitor output connector, but cannot be recorded in the VTR portion of this camcorder. This is designed to provide only some simple assistance to the operator in the use of an external I-Link capture hard drive). Memory Stick Slot. No Slow Shutter, No optional Boards, NO CCU operation, No Clip Link.
ACCESSORIES & OPTIONAL EQUIPMENT |
Supplied Accessories for DSR-400K:
- DSR-400 Camcorder Body
- Fujinon VCL-917BY 17x 2/3" Zoom Lens
- Shoulder Strap
- Camera Mic
- DXF-801 1.5" B&W Viewfinder
- VCTU14 Tripod Plate
- (no battery)
|
|
|
|
For more information about this manufacturer or to place an order, please contact VTP
VTP Phone Sales: 800-422-2444
Email: sales@vtpcorp.com |
Home /
Products /
Hot Deals /
Line Card /
Ordering /
Resource Center /
Events /
About Us / Restricted Access Login
All Logos, Trademarks, photos, information, and materials represented herein are used in conjunction with manufacturer reseller and/or authorized territorial representation agreements with Videotape Products, Inc. and/or remain the property of their respective owners. Specifications are subject to change without notice.
Copyright © 1999 - 2010 by Videotape Products, Inc. (VTP), Burbank, CA
|
|