Item Number |
Description |
WFM7120 |
SD Waveform Base Unit (1/2 RU); 2 SD standard non-looping inputs (switched output of selected input) with auto detect clock (525/59.94 or 625/50). EIA608 VANC Decode as basic text. Alarm and log if CC is missing. Display the CC as basic text mode, display V-chip overlaid on the picture (monitor mode), or in Status, Alarm, or Error screens (as appropriate). ANC data support (also for data that conforms to Japan ARIB standards). 1024x768 XGA display monitor output, XGA display output. No analog or digital audio monitoring beyond embedded audio PCM presence, no analog audio I/O in base unit. Must also order at same time of purchase, separately, or already have, a case that would fit this physical version of product, or a rack mount. |
Options for 1.485Gb/s and 3Gb/s Configurations: |
HD
Upgrade when not on initial order or part of a package on initial order is WFM712UP HD |
Part of
BAS Option
Package, on
Factory
Initial Order |
Part of
ALY Option
Package, on
Factory
Initial Order |
Enables 2 SDI input capability to be HD-SDI 1.485Gb/s (not adding additional physical inputs, just accepting the SD clocks and the 1.485Gb/s HD clock) for high definition monitoring, adds EIA608 VANC portion of EIA708 Decode as basic text. Inputs are still non-looping. |
CPS
Upgrade when not on initial order or part of a package on initial order is WFM712UP CPS, upgrade may require factory calibration (not included) |
Part of
BAS Option
Package, on
Factory
Initial Order |
Part of
ALY Option
Package, on
Factory
Initial Order |
Adds 2 physical analog composite passive loop-through inputs for composite analog monitoring EIA-608 Line 21 CC Monitoring. |
SIM
Upgrade when not on initial order or part of a package on initial order is WFM712UP SIM |
Part of
BAS Option
Package, on
Factory
Initial Order |
Part of
ALY Option
Package, on
Factory
Initial Order |
Allows User to Select and view two inputs at same time in tile display, versus only one otherwise (some limitations still apply). |
AVD
Upgrade when not on initial order or part of a package on initial order is WFM712UP AVD, restrictions may apply |
NOT in BAS package |
Part of
ALY Option
Package, on
Factory
Initial Order |
Audio Video Delay Auto Measure (AUDIO OPTION AD OR DDE IS ALSO REQUIRED). Proprietary Tektronix out of service measure, requires the purchase of Optional Tektronix TG700 with signals provided from either the DVG7 or HDVG7 Optional modules with A/V Timing Mode enabled). |
DL
Upgrade when not on initial order or part of a package on initial order is WFM712UP DL, restrictions may apply |
NOT in BAS package |
NOT in ALY package |
Enables the 2 HD-SDI input capability in Option HD to be Dual Link Input for YCbCR or RGB Dual Link Monitoring (OPTION HD IS ALSO REQUIRED). This option is the only option that is not currently part of any Options package for special savings. Some format limitations still apply. There is a maximum of one DL input in this DL configuration in this product. |
Jitter & Physical Layer Options for 1.485Gb/s Configuration ONLY (select EYE or PHY Option): |
EYE
Upgrade when not on initial order or part of a package on initial order is WFM712UP EYE, restrictions may apply |
NOT in BAS package |
Part of
ALY Option
Package, on
Factory
Initial Order
because it is
part of the PHY
Option. |
Manual Eye Parameters Measurement, and Physical Layer Status Display of Timing and Alignment. Jitter Waveform Display. Multiple High Pass Filters. Digital Cursors for enabling measurements with numeric basic jitter values, source signal level, cable loss, approximate cable length. Error Alarm Log with time code stamp. Multiple eye patterns are capable of being displayed in separate tiles (when combined with SIM Option). EYE cannot is installed with 3G. |
PHY
Upgrade when not on initial order or part of a package on initial order is WFM712UP PHY, restrictions may apply |
NOT in BAS package |
Part of
ALY Option
Package, on
Factory
Initial Order
(also includes EYE) |
Includes capabilities of EYE option and adds PHY Automated Enhanced Eye Parameters Measurement. Auto function lists enhanced component digital eye parameters numeric value measurement results of eye amplitude, eye rise time, eye fall time, eye rise-fall difference. PHY cannot be installed with 3G. |
3Gb/s, Jitter & Physical Layer Options that create a 3Gb/s Configuration ONLY (EYE or PHY Options are not possible): |
3G
Upgrade when not on initial order is WFM712UP 3G,
restrictions may apply |
NOT in BAS package |
NOT in ALY package |
Adds support for 3Gb/s single link HD-SDI formats, a hardware upgrade (OPTION HD ALSO REQUIRED, and as noted above, 3G cannot be installed when EYE or PHY are installed) |
JIT
Upgrade when not on initial order is WFM712UP JIT, restrictions may apply |
NOT in BAS package |
NOT in ALY package |
Adds Basic Jitter Measure and Waveform support for 3Gb/s single link HD-SDI formats (OPTION 3G and OPTION HD ALSO REQUIRED, and as noted above, 3G or 3G + JIT cannot be installed when EYE or PHY are installed) |
Audio Options (select one only): |
AD
Upgrade when not on initial order or part of a package on initial order is WFM712UP AD |
Part of
BAS Option
Package, on
Factory
Initial Order |
Part of
ALY Option
Package, on
Factory
Initial Order |
Adds Analog Audio I/O & PCM Digital Audio (embedded and AES/EBU formats). BBC PPM audio scales for analog audio. Breakout cable OPT62 not included (an additional $725). Adds basic enhanced support for Digital Audio Monitoring in embedded and AES/EBU formats. Simple Dolby presence indication with Option AD only. New Audio Loudness (Level EQ) Monitoring, Audio Packet Display (displays information on audio frame number, sample rate, number of active channels, and accumulated processing delay), BBC PPM audio scales for digital audio. |
DDE
Upgrade when not on initial order or part of a package on initial order is WFM712UP DDE |
NOT Part of
BAS Option
Package |
Part of
ALY Option
Package, on
Factory
Initial Order |
Includes basic AD option capability, adds support for Dolby Digital Audio AC-3 Decode to single pair LT/RT Dolby Pro Logic Mix (no Lfe), or LO/RO standard stereo signal (no Lfe), or Mono sum (e.g., LCR/Ls/Rs, no Lfe) Analog Audio, and Dolby E Decode to 8 Ch Analog Audio. Level Meters include Channel 9 and 10. Channel order of the level bars is mapped per SMPTE 320M, or per user preference. Select between phase and surround display. Breakout cable OPT62 not included. |
As color coded above, Special Options Packages exist for factory initial orders (PER package was discontinued): |
BAS Package |
Factory initial order configuration only for this cost-savings package for HD + CPS + SIM + AD. Options showing above, color coded with this color, are the components of the BAS Package.
(BAS package CAN be ordered with additional 3G or 3G+JIT options added to it at additional cost). |
ALY Package |
Factory initial order configuration only for everything in BAS Package + DDE + AVD + PHY + DAT. Options showing above, color coded with this color, are the components of the ALY Package.
(ALY package CANNOT be ordered with additional 3G or 3G+JIT options added to it). |
Special Options Other then DL that are not in any Packages: |
62
|
Analog Audio Breakout Cable for options AD, or DDE – 6 ft. Male 62 Pin D Connector to 8XLR Male Outputs and 12XLR Female Inputs |
01
Upgrade when not on initial order is WFM7F02 |
Portable Cabinet Option with handle and feet (if purchased separately later, after initial order, it is WFM7F02) |
02
Upgrade when not on initial order is WFM7F05-NN |
Dual Rack Cabinet Option ("NN" for WFM700, WFM61xx, WFM70xx, WFM71xx, any combination of those side by side (if purchased separately later, after initial order, it is WFM7F05-NN) |
05
Upgrade when not on initial order is WFM7F05-ON |
Dual Rack Cabinet Option ("N" for WFM700, WFM61xx, WFM70xx, WFM71xx, any combination of those side by side with an "O" for old WFM601, 764, 1700 Series, or 760 Series (if purchased separately later, after initial order, it is WFM7F05-ON) |
06
Upgrade when not on initial order is WFM7F06 |
Filler Panel, Blank Option, for unused side of Dual Rack Cabinet Option (if purchased separately later, after initial order, it is WFM7F06) |
Tektronix Field Service upgrades in the Los Angeles area by Tektronix personnel are an additional labor minimum.
Remote Control Panel is at additional cost (not showing). |