VTP | Tektronix WFM8200 Configuration Guide

Item Number	Description
WFM8200	HD/SD-SDI Waveform Monitor Base Unit (1/2 Rack Width); 2 SDI Inputs (3G-SDI, HD-SDI and SD-SDI support on the same inputs-auto detect). Base unit includes as standard HD-SDI, SD-SDI, DL Dual-Link signal formats including 2048x1080 XYZ, Digital Cursors. CaptureVu. Option 3G required for 3G-SDI support. Must also order at same time or purchase separately or already have a casing of some kind or a rack mount. Note: NO SIM simultaneous input monitoring or upgrade possible, NO PHY physical layer monitoring or upgrade possible, NO DAT advanced data analysis or upgrade possible. NO Proprietary Tektronix AVD audio/video delay measurement or upgrade possible even if an audio option is installed, if these are ever to be needed purchase WFM8300 model.
Standard Configuration:
Dual Link HD-SDI	Standard; Enables HD-SDI Dual Link Input capability for YCbCR or RGB or 2048x1080 XYZ Dual Link Monitoring. Some format limitations still apply.
SDI	Standard; Enables Component Serial Digital Video Input capability
Option for Eye, Jitter:
EYE Upgrade when not on initial order is WFM820UP-EYE	Eye Pattern Display and Jitter Measurement Package (includes 3G-SDI, HD-SDI, and SD-SDI Eye pattern display; automated measurements of jitter as jitter readouts, and cable parameters) Option 3G required for 3G-SDI support. Note: NO PHY or PHY upgrade possible, if this feature is ever to be needed purchase the WFM8300 model. *OPTION 3G ALSO REQUIRED for PHY 3G-SDI support*
Option for 3GB Single Link Input:
3G Upgrade when not on initial order is WFM820UP-3G	Adds support for 3Gb/s single link SMPTE 425M Level A and Level B HD-SDI formats. 3G waveform, vector, gamut, timing, 3G data analysis, and support for 3G audio monitoring (if audio option installed).
Options for Audio (select one only):
AD Upgrade when not on initial order is WFM820UP-AD	Adds one audio processor for basic enhanced support for Digital Audio Monitoring in embedded and AES/EBU formats. Simple Dolby presence indication. Support for Analog Audio I/O & PCM Digital Audio (embedded and AES/EBU formats). BBC PPM audio scales for analog audio. 2 sets of 6 channel Analog Audio Inputs and 8 channels Analog Audio Outputs, plus 16 channels Embedded or AES/EBU Digital Audio Support (8 channels at a time). Breakout cable OPT62 not included. *OPTION 3G ALSO REQUIRED for AD 3G-SDI support*
DDE Upgrade when not on initial order is WFM820UP-DDE	Includes capabilities of option AD and adds enhanced support for Dolby Digital Audio AC-3 Decode, and Dolby E Digital Audio, Dolby AC-3 Decode to 8 Ch Analog Audio. Settable Dolby Guard Band Limits with Dolby Guard Band Metering and display of VANC Dolby Metadata. Kit includes: One Audio Main Full/Digital Board Processor with BNC I/O connectors, Dolby E Digital Decoder Daughter Board, Analog Audio A-D/D-A Board, I/O 64-Pin Analog Connector for rear panel. Breakout cable OPT62 not included. *OPTION 3G ALSO REQUIRED for DDE 3G-SDI support*
Other Options:
PROD Upgrade when not on initial order is WFM820UP-PROD	Advanced Gamut Monitoring Package (Spearhead and Tektronix Luma Qualified Vector Display) *OPTION 3G ALSO REQUIRED for PROD 3G-SDI support*
CPS Upgrade when not on initial order is WFM820UP-CPS	Adds 2 NTSC/PAL composite analog video inputs. EIA-608 Line 21 CC Monitoring. SCH Phase Display. No Bowtie.
OPT-62	Analog Audio Breakout Cable for options AD, or DDE, 6 ft. Male 62 Pin D Connector to 8XLR Male Outputs and 12XLR Female Inputs.
01 Upgrade when not on initial order is same as WFM7F02	Portable Cabinet Option with handle and feet.
02 Upgrade when not on initial order is same as WFM7F05-NN	Dual Rack Cabinet Option ("NN" for WFM700, WFM61xx, WFM70xx, WFM71xx, any combination of those side by side (if purchased separately later, after initial order, it is WFM7F05-NN).
05 Upgrade when not on initial order is same as WFM7F05-ON	Dual Rack Cabinet Option ("N" for WFM700, WFM61xx, WFM70xx, WFM71xx, any combination of those side by side with an "O" for old WFM601, 764, 1700 Series, or 760 Series (if purchased separately later, after initial order, it is WFM7F05-ON).
06 Upgrade when not on initial order is same as WFM7F06	Filler Panel, Blank Option, for unused side of Dual Rack Cabinet Option (if purchased separately later, after initial order, it is WFM7F06).
Tektronix Field Service upgrades in the Los Angeles area by Tektronix personnel are an additional labor minimum. Remote Control Panel is at additional cost (not showing).

*VTP is certified to support sales of the MTM400 MPEG Transport Stream Monitor, and to demonstrate and support sales of Cerify Lite Content Verification Software.