Item Number |
Description |
WFM8300 |
HD/SD-SDI Waveform Monitor Base Unit (1/2 Rack Width); 2 SDI Inputs (3G-SDI, HD-SDI and SD-SDI support on the same inputs-auto detect). Base unit includes as standard HD-SDI, SD-SDI, DL Dual-Link signal formats including 2048x1080 XYZ, SIM simultaneous input monitoring, AVD support, and DAT advanced data analysis. Digital Cursors. CaptureVu. Proprietary Tektronix AVD audio/video delay measurement is supported if an audio option is installed. Option 3G required for 3G-SDI support. Must also order at same time or purchase separately or already have a casing of some kind or a rack mount. |
Standard Configuration: |
Dual Link HD-SDI |
Standard; Enables HD-SDI Dual Link Input capability for YCbCR or RGB or 2048x1080 XYZ Dual Link Monitoring. Some format limitations still apply. |
SDI |
Standard; Enables Component Serial Digital Video Input capability |
SIM |
Standard; Allows User to Select and view two inputs at same time in tile display, versus only one otherwise (some limitations may still apply). |
AVD |
Standard; Supports Audio Video Delay Auto Measure (AUDIO OPTION AD OR DDE IS ALSO REQUIRED). A Proprietary Tektronix out of service measure, requires the purchase of Optional Tektronix TG700 with signals provided from either the DVG7 or HDVG7 Optional modules with A/V Timing Mode enabled). |
DAT |
Standard; Enables ANC Data Inspector screen also showing packet detail, and Digital Data List of packets in full screen mode as a data dump, and Data Measure (using line and sample select). |
Option for Physical Layer, Eye, Jitter: |
PHY
Upgrade when not on initial order is WFM830UP-PHY |
Physical Layer Measurement Package (includes 3G-SDI, HD-SDI, and SD-SDI Eye pattern and jitter measurement displays and jitter readouts. OPTION 3G ALSO REQUIRED for PHY 3G-SDI support.
PHY Automated Enhanced Eye Parameters Measurement Auto function lists enhanced component digital eye parameters numeric value measurement results of eye amplitude, eye rise time, eye fall time, eye rise-fall difference. PHY Includes capabilities of EYE in the WFM8300. Manual Eye Parameters Measurement, and Physical Layer Status Display of Timing and Alignment. Jitter Waveform Display. Multiple High Pass Filters. Digital Cursors for enabling measurements with numeric basic jitter values, source signal level, cable loss, approximate cable length. Error Alarm Log with time code stamp. Jitter Measure and Waveform support for 3Gb/s single link HD-SDI formats in the WFM8300. |
Option for 3GB Single Link Input: |
3G
Upgrade when not on initial order is WFM830UP-3G |
Adds support for 3Gb/s single link SMPTE 425M Level A and Level B HD-SDI formats. 3G waveform, vector, gamut, timing, 3G data analysis, and support for 3G audio monitoring (if audio option installed). |
Options for Audio (select one only): |
AD
Upgrade when not on initial order is WFM830UP-AD |
Adds one audio processor for basic enhanced support for Digital Audio Monitoring in embedded and AES/EBU formats. Simple Dolby presence indication. Support for Analog Audio I/O & PCM Digital Audio (embedded and AES/EBU formats). BBC PPM audio scales for analog audio. 2 sets of 6 channel Analog Audio Inputs and 8 channels Analog Audio Outputs, plus 16 channels Embedded or AES/EBU Digital Audio Support (8 channels at a time). Breakout cable OPT62 not included.
OPTION 3G ALSO REQUIRED for AD 3G-SDI support |
DDE
Upgrade when not on initial order is WFM830UP-DDE |
Includes capabilities of option AD and adds enhanced support for Dolby Digital Audio AC-3 Decode, and Dolby E Digital Audio, Dolby AC-3 Decode to 8 Ch Analog Audio. Settable Dolby Guard Band Limits with Dolby Guard Band Metering and display of VANC Dolby Metadata. Kit includes: One Audio Main Full/Digital Board Processor with BNC I/O connectors, Dolby E Digital Decoder Daughter Board, Analog Audio A-D/D-A Board, I/O 64-Pin Analog Connector for rear panel. Breakout cable OPT62 not included.
OPTION 3G ALSO REQUIRED for DDE 3G-SDI support |
Other Options: |
PROD
Upgrade when not on initial order is WFM830UP-PROD |
Advanced Gamut Monitoring Package (Spearhead and Tektronix Luma Qualified Vector Display)
OPTION 3G ALSO REQUIRED for PROD 3G-SDI support |
CPS
Upgrade when not on initial order is WFM830UP-CPS |
Adds 2 NTSC/PAL composite analog video inputs. EIA-608 Line 21 CC Monitoring.
SCH Phase Display. No Bowtie. |
OPT-62 |
Analog Audio Breakout Cable for options AD, or DDE, 6 ft. Male 62 Pin D Connector to 8XLR Male Outputs and 12XLR Female Inputs. |
01
Upgrade when not on initial order is same as WFM7F02 |
Portable Cabinet Option with handle and feet. |
02
Upgrade when not on initial order is same as WFM7F05-NN |
Dual Rack Cabinet Option ("NN" for WFM700, WFM61xx, WFM70xx, WFM71xx, any combination of those side by side (if purchased separately later, after initial order, it is WFM7F05-NN). |
05
Upgrade when not on initial order is same as WFM7F05-ON |
Dual Rack Cabinet Option ("N" for WFM700, WFM61xx, WFM70xx, WFM71xx, any combination of those side by side with an "O" for old WFM601, 764, 1700 Series, or 760 Series (if purchased separately later, after initial order, it is WFM7F05-ON). |
06
Upgrade when not on initial order is same as WFM7F06 |
Filler Panel, Blank Option, for unused side of Dual Rack Cabinet Option (if purchased separately later, after initial order, it is WFM7F06). |
Tektronix Field Service upgrades in the Los Angeles area by Tektronix personnel are an additional labor minimum.
Remote Control Panel is at additional cost (not showing). |